Kategóriák
Termék részletek


2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C

Raktárkészlet: VAN
2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
  • 2-CH Triac HAT Raspberry Pi-hez, integrált MCU, UART / I2C
7 693 Ft + 27% ÁFA | Bruttó:9 770 Ft
Értesítést kérek árcsökkenés esetén
  • Kétcsatornás kétirányú Triac HAT modul Raspberry Pi-hez, integrált MCU, parancs vezérlés UART / I2C interfészen keresztül

    Kétcsatornás Triac HAT modul a Raspberry PI-khez tervezve. 

    Designed For Raspberry Pi Series

    Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards

    FEATURES AT A GLANCE

    • STM32F0 MCU controller, requires minimal Raspberry Pi resource, UART / I2C communication
    • RC snubber circuit, protect the triac from power fluctuation
    • Up to 4400W output power, under ideal heat dissipation condition
    • Optocoupler isolation, preventing interference from the high voltage circuit
    • Indicator for easy checking the status of triac
    • Reserved UART and I2C interface, for working with other host control boards
    • Data rate: up to 921.6kbps for UART,up to 1024kbps for I2C
    • Comes with development resources and manual (examples in C and Python)

     

     

    STM32F0 MCU Onboard

    Integrates STM32F030 MCU, Supports Directly Command Control, Easy For Developping
    Quicker Response, Requires Minimal Resource From The Raspberry Pi

    High Data Rate, Always One Step Ahead

    Up To 921.6kbps For UART,Up To 1024kbps For I2C

    Powerful Output Power

    Up To 4400W Output Power, Under Ideal Heat Dissipation Condition

    Optocoupler Isolation Safety First!

    Optoisolated Solution, Preventing Interference From The High Voltage Circuit

    Home Appliance Support

    In The Example Of Controlling 220VAC Home Appliances

    Applications

    What's On Board

    1. BTA24-600 high power bidirectional triac
    2. MOC3021S photocoupler, the triac driver
    3. LTV-824S AC photocoupler
    4. RC snubber circuit
    5. LM358DR OP amplifier
    6. STM32F030F4P6 main controller
    7. RT9193-33PB power chip
    8. Output indicator
    9. 20A blow fuse

     

    1. Standard Raspberry Pi 40PIN GPIO header
    2. MCU control interface, for use with other host control boards like Arduino
    3. AC input
    4. AC output
    5. Data bus selection
      A: use Raspberry Pi I2C bus
      B: use Raspberry Pi UART bus
    6. Mode selection
      A: I2C mode
      B: UART mode

     

     

    Specifications
    AC VOLTAGE 100 ~ 600V UART DATA RATE 1.2 ~ 921.6 kbps
    AC CURRENT 0~20A I2C DATA RATE 1024 kbps
    CONTROLLER STM32F030 LOGIC LEVEL VOLTAGE 3.3V/5V
    COMMUNICATION BUS I2C/UART DIMENSIONS 65 × 56.5(mm)
    Pinout Definition

    Outline Dimensions

    Resources

    https://www.waveshare.com/wiki/2-CH_TRIAC_HAT

    Demo codess

    Documents

  • Kompatibilitás
    PI-4B, PI-3B+, PI-3, PI-2, B+, Zero-W, Zero-WH
    Raktárkészlet
    VAN
    Cikkszám
    RPI-WS17852
;