Kategóriák
Termék részletek
Főkategória >Waveshare
 
 

Kettős Ethernet-alaplap a Raspberry Pi CM5 -höz fém házzal, 4G/5G-modul támogatással, két 4K-kijelzőkimenettel és két MIPI-interfésszel, beépített 40 tűs GPIO-csatlakozóval és két USB 3.2 Gen1-porttal, valamint PoE-modul támogatással

Raktárkészlet: NINCS
Kettős Ethernet-alaplap a Raspberry Pi CM5 -höz fém házzal, 4G/5G-modul támogatással, két 4K-kijelzőkimenettel és két MIPI-interfésszel, beépített 40 tűs GPIO-csatlakozóval és két USB 3.2 Gen1-porttal, valamint PoE-modul támogatással
  • Kettős Ethernet-alaplap a Raspberry Pi CM5 -höz fém házzal, 4G/5G-modul támogatással, két 4K-kijelzőkimenettel és két MIPI-interfésszel, beépített 40 tűs GPIO-csatlakozóval és két USB 3.2 Gen1-porttal, valamint PoE-modul támogatással
  • Kettős Ethernet-alaplap a Raspberry Pi CM5 -höz fém házzal, 4G/5G-modul támogatással, két 4K-kijelzőkimenettel és két MIPI-interfésszel, beépített 40 tűs GPIO-csatlakozóval és két USB 3.2 Gen1-porttal, valamint PoE-modul támogatással
  • Kettős Ethernet-alaplap a Raspberry Pi CM5 -höz fém házzal, 4G/5G-modul támogatással, két 4K-kijelzőkimenettel és két MIPI-interfésszel, beépített 40 tűs GPIO-csatlakozóval és két USB 3.2 Gen1-porttal, valamint PoE-modul támogatással
  • Kettős Ethernet-alaplap a Raspberry Pi CM5 -höz fém házzal, 4G/5G-modul támogatással, két 4K-kijelzőkimenettel és két MIPI-interfésszel, beépített 40 tűs GPIO-csatlakozóval és két USB 3.2 Gen1-porttal, valamint PoE-modul támogatással
31 391 Ft + ÁFA | Bruttó:39 866 Ft
Nincs raktáron
Készletértesítő
Dual Ethernet Base Board For Raspberry Pi CM5, Supports 4G / 5G module, Dual 4K Display Outputs and Dual MIPI Interfaces, Onboard 40PIN GPIO Header And Dual USB 3.2 Gen1 Ports, PoE Module Support
Részletek Adatok Csomag tartalma
  • Dual Ethernet Base Board For Raspberry Pi CM5, Supports 4G / 5G module, Dual 4K Display Outputs and Dual MIPI Interfaces, Onboard 40PIN GPIO Header And Dual USB 3.2 Gen1 Ports, PoE Module Support
    Dual Ethernet Base Board for CM5

    Designed for Raspberry Pi Compute Module 5

    Dual Ethernet Base Board For Raspberry Pi CM5, front view
    Version Options
    CM5-DUAL-ETH-4G/5G-BASE

    CM5-DUAL-ETH-4G/5G-BASEthe base board only

    CM5-DUAL-ETH-4G/5G-BOX-A

    CM5-DUAL-ETH-4G/5G-BOX-Athe base board + metal case + cooling fan + power supply

    Specifications
    CM5 socketSuitable for all variants of Compute Module 5
    Networking1000M Ethernet RJ45 port × 12500M Ethernet RJ45 port × 1
    ConnectorRaspberry Pi 40PIN GPIO header
    USBUSB 3.2 Gen1 × 2
    MIPI4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector)
    VideoHDMI port × 2, supports dual 4K display outputs
    M.2M.2 M KEY (PCIe Gen2/3 x 1)
    M.2 (4G / 5G)M.2 M KEY, supports connecting 4G / 5G communication module
    StorageTF card socket for Compute Module 5 Lite (without eMMC) variants
    Fan Header5V, 4PIN JST-SH PWM fan connector
    Power Input7V~36V wide voltage range DC jack, 5V 5A Type-C port
    Dimensionsthe base board: 99.60 × 87.00 (mm) the case: 104.80 × 90.00 × 29.70 (mm)

    Check the Compute Module 5variants

    What's the differences
    CM5 Base BoardInterface count and specifications
    PoEGigabitETH40PINGPIOPCIeUSB①MIPIHDMIRTCFanHeader②PowerInputFeatures
    NANO A√3.0×1×2SH1.0√5VCM5 sized
    NANO B×1√16PIN PCIe3.0×1×2√SH1.0√5VCM5 sized
    mini Base A×1√16PIN PCIe3.0×22.0×2×2×2ML/CR1220√5Vmini size
    mini Base B×1√M.2 M KEY3.0×22.0×2×2×2ML/CR1220√5Vmini size, onboard EEPROM and encryption chip
    Mini Dual Gigabit×2√3.0×1SH1.0√5Vdual ETH
    Dual ETH A1G ×1 2.5G ×1√M.2 M KEY3.0×12.0×2×2×2ML/CR1220√7V~36Vdual ETH, onboard EEPROM and Encryption chip
    Dual ETH B1G ×1 2.5G ×1√M.2 M KEY3.0×12.0×1×2×1SH1.0√5Vdual ETH ports
    Dual ETH 4G/5G1G ×1 2.5G ×1√M.2 M KEY3.0×2×2×2ML/CR1220√7V~36Vdual ETH and 4G/5G support
    PoE Base√×1√M.2 M KEY3.0×22.0×2×2×2ML/CR1220√5VUSB×4
    Raspberry Pi official③×1√M.2 M KEY3.0×2×2×2ML/CR1220√5VOfficial IO base board
    IPCBOX-CM51G ×1 2.5G ×1M.2 M KEY3.0×12.0×3×1SH1.0√7V~36Vdual ETH, 4G/5G support,RS485/RS232,Encryption chip,EEPROM,CAN,digital inputs,digital outputs,audio,an buzzer
    CM5 Dual ETH Multi-function1G ×1 2.5G ×1M.2 M KEY3.0×12.0×2×2×1SH1.0√7V~36Vdual ETH, 4G/5G support,RS485,Encryption chip,digital input,relay,and buzzer
    CM5 Wireless Extension1G ×1M.2 M KEY, M.2 B KEY/Mini-PCIe3.0×12.0×2×2×1ML/CR1220√5V or 7V~36V5G/4G,Lora,RS485,CAN,and rail-mount support
    Note① USB 3.0 is equivalent to USB 3.2 Gen1.② Unless otherwise specified, the Fan header usually is JST-SH type connector.③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).
    Connecting with Compute Module 5

    standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO headersuitable for Compute Module 5 Lite / eMMC series module

    Dual Ethernet Base Board connecting with Compute Module 5

    * for reference only, please refer to the package content for detailed part list

    4G / 5G module compatibility

    compatible with communication modules with M.2 B KEY interface

    Dual Ethernet Base Board For Raspberry Pi CM5, Suitable for 4G/5G communication modules

    * An additional communication module is required to enable 5G/4G/3G/2G cellular network function, recommended: SIM7600G-H-M.2,SIM8200EA-M2, and SIM8262E-M2.

    Supports connecting to M.2 NVMe Drive

    Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive

    Dual Ethernet Base Board For Raspberry Pi CM5, Supports M.2 NVMe Solid State Drive

    * for reference only, please refer to the package content for detailed part list

    Applicable M.2 drive sizes
    Dual Ethernet Base Board For Raspberry Pi CM5, Suitable with M.2 Solid State Drive dimensions
    NVMe Drive Slot Support
    Dual Ethernet Base Board For Raspberry Pi CM5, Suitable with Solid State Drive Interface

    * Only supports the NVMe Protocol Solid State Drives.

    More rich interfaces

    Features multiple interfaces including ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY , for easy to use

    Dual Ethernet Base Board For Raspberry Pi CM5, More rich interfaces
    Precise cut-out with clear label

    each cut-out is completely aligned with the connector

    Dual Ethernet Base Board For Raspberry Pi CM5, Precise hole positioning design
    Cooling fan included

    comes with cooling fan, combined with the airflow vent, better heat dissipation

    Dual Ethernet Base Board For Raspberry Pi CM5, The top of the case is reserved for ventilation openings, built-in fans for better heat dissipation.

    * for reference only, please refer to the package content for detailed part list

    wall mount support

    Wall Mount Holes On Two Sides, handy for mounting.Reserved Rail-mount buckle mounting holes on the Back for Rail-mount Installation

    Dual Ethernet Base Board For Raspberry Pi CM5, The top of the case is reserved for ventilation openings, built-in fans for better heat dissipation.

    * for reference only, the rail-mount buckle is not included, please purchase separately if needed

    What's On Board
    Dual Ethernet 4G/5G Base Board designed for CM 5, onboard components
    1. CM5 socketsuitable for all variants of Compute Module 5
    2. 40PIN GPIO headersuitable for connecting to various HAT / HAT+ modules
    3. M.2 M keysupports 2242 / 2230 NVMe Solid State Drives or AI modules
    4. Programmingused for eMMC burning or USB OTG
    5. BOOT switchswitch to ON: burning mode switch to OFF: system normal startup mode
    6. PSW power buttonLong press to force power off, short press to soft power off or on
    7. System indicators
    8. M.2 M key status indicators
    9. RTC battery holdersupports CR / ML 1220 button cell
    10. Dual MIPI interfacesfor connecting to DSI displays or CSI cameras
    11. DC power jackDC 5.5 2.1 jack, supports DC 7V ~ 36V power supply
    12. M.2 B keysupports connecting 4G/5G communication module
    13. Dual USB 3.2 Gen1 portsUSB 3.2 Gen1 Type-A ports, up to 5Gbps
    1. FAN headerfor connecting cooling fan, 5V, 4PIN JST-SH PWM fan connector
    2. M.2 M key status indicatorkeeps blinking when NVMe drive is reading / writing
    3. Dual HDMI portssupports dual 4K outputs
    4. PoE headerfor connecting PoE module, supports PoE power supply through 1000M Ethernet port using PoE switch
    5. 1000M Ethernet RJ45 portsupports 10M / 100M / 1000M network connections
    6. 2500M Ethernet RJ45 portsupports 10M / 100M / 1000M / 2500M network connections
    7. USB to 2500M Ethernet chip
    8. IO-VREF selectionCM5 IO logic level: 3.3V (default) or 1.8V
    9. Other function pinsHardware disable function, write protection and chip address selection
    10. TF card slotfor connecting a TF card with pre-burnt image (Lite variant ONLY)
    11. NANO SIM card slot
    12. USB3.0 HUB
    Application Example

    Suitable for Raspberry Pi applications in remote communication or other industrial situations

    Dual Ethernet Base Board For Raspberry Pi CM5, Suitable for Raspberry Pi applications in remote communications or other industrial settings

    * for reference only, the displayandcamera module are not included, please purchase separately if needed

    Outline dimensions
    Dual Ethernet Base Board designed for CM 5, outline dimensions Dual Ethernet Base Board designed for CM 5, outline dimensions
    About Compute Module 5
    Raspberry Pi Compute module 5, front view
    Newly upgraded, more powerful
    • Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
    • More options for RAM (2GB / 4GB / 8GB / 16GB)
    • More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
    • Faster eMMC Flash storage, up to 200 Mbps data rate
    • Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
    • Adopts B to B connectors, most compatible with Compute Module 4
    • Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
    • Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules
    Resources & Services

    * Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

  • Brand
    Waveshare
    PartNumber
    CM5-DUAL-ETH-4G/5G-BOX-A (EU)
    Raktárkészlet
    NINCS
    Cikkszám
    RPI-WS33063

  • CM5-DUAL-ETH-4G/5G-BASE

    1. CM5-DUAL-ETH-4G/5G-BASE x1
    2. Screws pack x1
    1CM5-DUAL-ETH-4G/5G-BASE
    2Screws pack

    CM5-DUAL-ETH-4G/5G-BOX-A

    1. CM5-DUAL-ETH-4G/5G-BASE x1
    2. Mental case (top and bottom boxes)
    3. CM5-FAN-4010-5V x1
    4. OPTIONS 12V 4A power adapter x1
    5. Rubber plug 4PCS x1
    6. Screws pack x1
    Dual Ethernet Base Board designed for CM 5, outline dimensions
:
;