Mini Dual Gigabit Ethernet alaplap / Mini-számítógép-készlet a Raspberry Pi Compute Module 5-höz (nem tartozék), a CM5 összes változatához
-
Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5Dual Gigabit Ethernet Base Board For CM5Mini, Practical And Neat
Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Version Options* Please refer to the Package Content for detailed part list
CM5-DUAL-ETH-MINIthe dual Gigabit Ethernet base board only
CM5-DUAL-ETH-MINI-BOX In addition to the dual Gigabit Ethernet base board, it is equipped with Aluminum Alloy case and 27W power supply
Optional Black Metal CaseProvides better protection for the base board along with efficient heat dissipation
for reference only, CM5 is NOT included.SpecificationsCM5 socket suitable for all variants of Compute Module 5 Networking Dual Gigabit Ethernet RJ45 connectors USB USB 3.0 port PIN HEADER Raspberry Pi 40PIN GPIO header Storage TF card socket for Compute Module 5 Lite (without eMMC) variants Fan header 4-wire SH1.0 port, allows speed adjustment and measurement, 5V Power input 5V, Type-C interface Dimensions the base board: 55.0 × 68.0mm with metal case: 61.0 × 75.0 × 27.5mm What's the differencesCM5 Base Board Interface count and specifications PoE Gigabit ETH 40PIN GPIO PCIe USB① MIPI HDMI RTC Fan Header② Power Input Features NANO A
√ 3.0×1 ×2 SH1.0 √ 5V CM5 sized NANO B
×1 √ 16PIN PCIe 3.0×1 ×2 √ SH1.0 √ 5V CM5 sized mini Base A
×1 √ 16PIN PCIe 3.0×2 2.0×2 ×2 ×2 ML/CR1220 √ 5V mini size mini Base B
×1 √ M.2 M KEY 3.0×2 2.0×2 ×2 ×2 ML/CR1220 √ 5V mini size, onboard EEPROM and encryption chip Mini Dual Gigabit
×2 √ 3.0×1 SH1.0 √ 5V dual ETH PoE Base
√ ×1 √ M.2 M 3.0×2 2.0×2 ×2 ×2 ML/CR1220 √ 5V USB×4 Raspberry Pi official
③ ×1 √ M.2 M 3.0×2 ×2 ×2 ML/CR1220 √ 5V Official IO base board Note ① USB 3.0 is equivalent to USB 3.2 Gen1. ② Unless otherwise specified, the Fan header usually is JST-SH type connector. ③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). Connecting with Compute Module 5standard CM5 socket and 40PIN GPIO headersuitable for Compute Module 5 Lite/eMMC series module
for reference only, CM5 is NOT included.Precise cut-out with clear labeleach cut-out is completely aligned with the connector
- Comes with anti-slip rubber(unassembled)
- PSW button, for system power ON/OFF control without frequent plugging and unplugging of the power supply
- Antenna connector, for connecting antenna to build a wireless router
- BOOT button, for setting the programming mode
- LED indicator for monitoring the working status of the system
- TF card slot, precise cut-out with clear label
Magnetic DesignAdopts Magnetic removable top with location columns, easy to fix and better protection for the GPIO pins
Heat Dissipation DesignMetal case for large area thermal conductivity and heat dissipationCombined with heatsink fins for more efficient cooling
Application exampleSuitable for Raspberry Pi or other industrial occasions with special function requirements
Assembly Guide1. Remove the bottom screws then the bottom panel.
2. Gently push the Ethernet port and take out the CM5 mini base board.
3. Paste the thermal tapes on the front and back sides of the CM5, then install the CM5 to the base board
4. Install the base board to the metal case, fix the bottom panel, then insert the TF card and power on.
for reference only, CM5 is NOT included.What's On Board- 40PIN GPIO header for connecting sorts of HAT
- CM5 socket suitable for all variants of Compute Module 5
- PSW button
- BOOT button
- RTC battery headerfor connecting rechargeable RTC battery
- FAN header for connecting cooling fan, allows speed adjustment and measurement
- RJ45 Gigabit Ethernet ports Dual RJ45 Gigabit Ethernet ports, 10/100/1000M compatible ETHERNET 0: CM5 original network port ETHERNET 1: PCIe extended network port
- USB3.2 Gen1 Type-A port for connecting sorts of USB devices
- Type-C port 5V power supply, or used for eMMC programming
- TF card slot for connecting a TF card with pre-burnt image (Lite variant ONLY)
- RTL8111H Gigabit NIC chip
- SYSTEM switch EEPROM_WP: Prevent EEPROM from being overwritten WiFi_DIS: WiFi disabled, only for CM5 versions with wireless BT_DIS: Bluetooth disabled, only for CM5 versions with wireless
- Indicators Red light: indicating the power supply status of Raspberry Pi Green light: indicating the working status of Raspberry Pi
Outline dimensionsAbout Compute Module 5Newly upgraded, more powerful- Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
- More options for RAM (2GB / 4GB / 8GB / 16GB)
- More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
- Faster eMMC Flash storage, up to 200 Mbps data rate
- Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
- Adopts B to B connectors, most compatible with Compute Module 4
- Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
- Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules
Resources & Services* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
-
51 173 Ft + 27% ÁFA | Bruttó:64 990 Ft
-
51 173 Ft + 27% ÁFA | Bruttó:64 990 Ft
-
Brand WaveshareRaktárkészlet VANCikkszám RPI-WS31074Státusz ÚJ