RP2350-POE-ETH Development Board, Dual-Core And Dual-Architecture, W6300 Ethernet Controller, Supports PoE Expansion Via A PoE Module - With pre-soldered headers
-
RP2350-POE-ETH Development Board, Dual-Core And Dual-Architecture, W6300 Ethernet Controller, Supports PoE Expansion Via A PoE ModuleRP2350-POE-ETH
Based On RP2350, With 100Mbps RJ45 Ethernet Port, Optional PoE Module

FeaturesDesigned by Waveshare, the RP2350-POE-ETH is a high-performance embedded development board based on the RP2350A microcontroller, onboard 16MB NOR Flash and a W6300 hardwired TCP/IP Ethernet controller. It can be powered via a USB Type-C port or through an Ethernet cable when used with the extra PoE module. The board also features a programmable WS2812 RGB LED and 20 × user-programmable GPIO pins for flexible expansion, making it suitable for various IoT network projects and embedded applications.
- RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
- 520KB of Static RAM, and 16MB of onboard Flash memory
- Onboard USB Type-C port for power supply and programming
- Onboard W6300 with integrated TCP/IP protocol stack
- USB 1.1 host and device support
- Castellated module allows soldering direct to carrier boards
- Drag-and-drop programming using mass storage over USB
- 20 × multi-function GPIO pins, compatible with some Pico HATs
- Accurate clock and timer on-chip
- Temperature sensor
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
Version Options
RP2350-POE-ETHStandard version, without PoE module

RP2350-POE-ETH-MWith pre-soldered headers, without PoE module

RP2350-POE-ETH-KitStandard version, with PoE module

RP2350-POE-ETH-M-KitWith pre-soldered headers, with PoE module
* Note: The RP2350-POE-ETH and RP2350-POE-ETH-M versions do not include the PoE module, but both support PoE expansion. A PoE module is required to enable the PoE function.
Supports multiple communication modesSupports TCP Server / TCP Client / UDP Server / UDP Client

Supports PoE ModuleProvides Both Network Connection And Power Supply Via Only One Ethernet Cable


* the PoE module is optional, and the switch in the picture above is NOT included.
Two power supply methodsSupports both PoE* and USB Type-C power supply

* the PoE module is required.
dual-core, dual-architectureAdopts dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
Supports C/C++, MicroPython, ArduinoComprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
20 × multi-function GPIO pinsconfigurable pin function, allowing flexible development and integration
What's On Board
- USB Type-C connectorFor power and programming; supports USB 1.1 host and device modes
- WS2812Cool RGB LED
- BOOT buttonPress it when resetting to enter download mode
- RESET button
- RP2350ADual-core and dual-architecture design, up to 150 MHz operating frequency
- PoE module & power supply header
- 100Mbps RJ45 Ethernet port
- Debug Interface
- Low-Dropout Linear Regulator (LDO)VOUT: 3.3 V; Max. Output current: 800mA
- 16MB NOR-Flash
- W6300Ethernet Controller
outline dimensions
Pico Product SelectionPRODUCT Voltage regulator chip USB Flash Lithium battery header Features RP2350 chip
Raspberry Pi Pico 2DC-DC, 800mA Micro USB 4MB - -
Raspberry Pi Pico 2 WDC-DC, 800mA Micro USB 4MB - with WIFI and Bluetooth
Raspberry Pi Pico 2 WHDC-DC, 800mA Micro USB 4MB - with WIFI and Bluetooth
CAN ver.DC-DC, 2000mA Type-C 4MB - CAN interface
Type-A ver.LDO, 500mA Type-A 4MB - -
Type-C female ver.LDO, 800mA Type-C 4MB - -
Type-C male ver.LDO, 800mA Type-C 2MB - -
PIO-USB female ver.LDO, 500mA Type-C 2MB - with PIO-USB Type-C female port
PIO-USB male ver.LDO, 500mA Type-C 2MB - with PIO-USB Type-C male port
Tiny ver.LDO, 800mA Separate Type-C port adapter 4MB - Separate adapter board design, adapting USB Type-C port via FPC
RGB Matrix ver.LDO, 800mA Type-C 16MB - Onboard 8 x 8 RGB LED Matrix
ETH Port ver.LDO, 800mA Type-C 4MB - with Ethernet port
PoE ver.LDO, 800mA Type-C 16MB - with Ethernet port; Supports PoE expansion via a PoE Module
USB ver.LDO, 500mA Type-A, Type-C 2MB - with PIO-USB Type-A and USB Type-C port
core boardLDO, 800mA Separate Type-C port adapter 16MB - -
wireless Plus ver.LDO, 800mA Type-C 16MB - Supports Wi-Fi and Bluetooth
1.43inch Round Touch AMOLED ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.43inch AMOLED Touch LCD
1.64inch Touch AMOLED ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.64inch AMOLED Touch LCD
1.75inch Round Touch AMOLED ver.DC-DC, 2000mA LDO,300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.75inch AMOLED Touch LCD
1.8inch Touch AMOLED ver.DC-DC, 2000mALDO,300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.8inch AMOLED Touch LCD
2.41inch Touch AMOLED ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.41inch Touch AMOLED
0.85inch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 0.85inch IPS LCD
0.96inch LCD ver.DC-DC, 2000mA Type-C 4MB Support(allows recharging the battery and powering the board at the same time) 0.96inch IPS LCD
1.28inch Round LCD ver.LDO, 300mA Type-C 4MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD
1.28inch Round Touch LCD ver.LDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS touch LCD
1.46inch Round Touch ver.DC-DC, 2000mA Type-C 16MB - 1.46inch touch LCD
1.47inch LCD ver.LDO, 300mA Type-C 16MB - 1.47inch IPS LCD
1.47inch LCD USB ver.LDO, 300mA Type-A 16MB - 1.47inch IPS LCD
1.54inch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch IPS LCD
1.54inch Touch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch IPS Touch LCD
1.69inch Touch LCD ver.LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.69inch Touch LCD
1.85inch Round Touch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.85inch Touch LCD
2inch Touch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2inch Touch LCD
2.1inch Round Touch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.1inch Touch LCD
2.1inch Round Curved Touch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.1inch 2.5D Curved Touch LCD
2.8inch Touch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.8inch IPS Touch LCD
2.8inch Round Touch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.8inch IPS Touch LCD, RGB interface
3.49inch Touch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 3.49inch IPS Touch LCD
3.5inch Touch LCD ver.DC-DC, 2000mALDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 3.5inch Touch LCD
4inch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 4inch IPS LCD, RGB interface
4inch Touch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 4inch IPS Touch LCD, RGB interface
4.3inch Touch LCD ver.LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 4.3inch IPS Touch LCD, RGB interface
7inch Touch LCD ver.DC-DC, 3000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 7inch IPS Touch LCD, RGB interface
7inch LCD ver.DC-DC, 3000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 7inch IPS LCD, RGB interface
1.54inch e-Paper ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch e-Paper display
1.54inch touch e-Paper ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.54inch touch e-Paper display
Plus ver.DC-DC, 2000mA Type-C 4MB/16MB Support(allows recharging the battery and powering the board at the same time) -
DVI port ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) Onboard DVI interface, TF card slot and PIO-USB port RP2040 chip
Raspberry Pi Pico WDC-DC, 3000mA Micro USB 2MB - with WIFI
Raspberry Pi Pico WHDC-DC, 3000mA Micro USB 2MB - with WIFI
Raspberry Pi PicoDC-DC, 800mA Micro USB 2MB - -
Raspberry Pi Pico HDC-DC, 800mA Micro USB 2MB - -
Type-A ver.LDO, 500mA Type-A 4MB - -
Mini ver.LDO, 800mA Type-C 2MB - -
Tiny ver.LDO, 500mA Separate Type-C port adapter 2MB - Separate adapter board design, adapting USB Type-C port via FPC
RGB Matrix ver.LDO, 500mA Type-C 2MB - Onboard 5×5 RGB LED matrix
BLE ver.LDO, 300mA Separate Type-C port adapter 2MB - Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC
ETH Port ver.LDO, 500mA Type-C 4MB - with Ethernet port
0.99inch Round LCD with case ver.LDO, 500mA Type-C 2MB - 0.99inch IPS LCD, CNC metal case
1.28inch Round LCD ver.LDO, 300mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD
1.28inch Round LCD with case ver.LDO, 300mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD, CNC metal case
1.28inch Round Touch LCD ver.LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch Touch LCD
1.28inch Round Touch LCD with case ver.LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch Touch LCD, CNC metal case
1.69inch Touch LCD ver.LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.69inch Touch LCD
1.85inch Touch LCD ver.DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.85inch Touch LCD
0.96 LCD ver.DC-DC, 1800mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 0.96inch IPS LCD
Plus ver.DC-DC, 1800mA Type-C 4MB/16MB Support(allows recharging the battery and powering the board at the same time) -
DVI port ver.LDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) Onboard DVI interface, TF card slot and PIO-USB port
Cam & LCD ver.- Type-C 16MB - Onboard grayscale camera and 1.14inch IPS LCD display
-
Brand WavesharePartNumber RP2350-POE-ETH-M-KitRaktárkészlet VANCikkszám RPI-WS35200Státusz ÚJ  
-
RP2350-POE-ETH
- RP2350-POE-ETH x1
- 20PIN header x2
RP2350-POE-ETH-Kit
- RP2350-POE-ETH x1
- PoE module x1
- Round-head screw + nut x2
- 20PIN header x2
RP2350-POE-ETH-M
RP2350-POE-ETH with pre-soldered headers x1
RP2350-POE-ETH-M-Kit
- RP2350-POE-ETH with pre-soldered headers x1
- PoE module x1
- Round-head screw + nut x2















