0 Ft
Termék részletek
Industrial 6-Channel RP2350 Relay Module, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case, Optional For Wireless Function
Industrial 6-Channel RP2350 Relay Module, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case, optional for wireless function
-
Industrial 6-Channel RP2350 Relay Module, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case, optional for wireless functionIndustrial 6-Ch RP2350 Relay Module
Based on RP2350, Onboard RS485 / Pico HAT interfaces
Built-in protection circuits such as power isolation and optocoupler isolation, Safe & Stable & Reliable
Features at a glance- RP2350B microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
- Built-inRaspberry Pi Radio Module 2, supports Wi-Fi 4 wireless networking and Bluetooth 5.2 (for Wi-Fi module version only)
- 520KB of SRAM, 16MB onboard Flash memory
- Type-C connector for easier use
- High quality relay, contact rating: ≤10A 250VAC/30VDC
- Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors
- Onboard 40PIN header compatible with some Raspberry Pi Pico HATs, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc.
- Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications
- Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay
- Onboard digital isolation to prevent interference from external signal
- Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
- Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module
- Rail-mounted ABS case, easy to install, safe to use
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- Adapting 34 × multi-function GPIO pins
- 1 × HSTX, 2 × I2C, 2 × UART, 8 × 12-bit ADC, 24 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
Version Options
RP2350-Relay-6CHStandard version, without Wi-Fi module
RP2350-Relay-6CH-WWi-Fi module version, built-in Raspberry Pi Radio Module 2
SpecificationsMicrocontroller RP2350B Wireless communication 2.4GHz Wi-Fi (802.11n), Bluetooth 5.2, BLE (for Wi-Fi module version only) USB Connector USB Type-C Power supply 5V Functions Power supply, USB communication, firmware downloading, etc. ISOLATED RS485 Connector Screw terminal Direction control Hardware automatic control Protection TVS diode, surge protection & ESD protection Resistor Onboard reserved 120R matching resistor, NC by default, enabled via jumper Expanded interface Onboard 40PIN header compatible with some Raspberry Pi Pico HATs, easy to expand other functions such as RTC / CAN / RS232 / LoRa / sensor, etc Relay Contact rating ≤10A 250VAC/30VDC Relay channels 6 Contact form 1NO 1NC Isolation Optocoupler isolation LED indicators RGB RGB colorful LED, supports programmable control for display color PWR Red power indicator, lights up when there is USB connection and voltage is detected TXD Green TX indicator, lights up when the RS485 port sends data RXD Blue RX indicator, lights up when the device port sends data back power supply Screw terminal Voltage range 7~36V Appearance Enclosure Rail-mount ABS protective case Dimensions 145 × 90 × 40mm dual-core, dual-architectureThe unique dual-core, dual-architecture capability of RP2350B allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment
Optional for Wi-Fi & Bluetooth moduleAdopts Infineon’s CYW43439, supports Wi-Fi 4 wireless network and Bluetooth 5.2
(* for Wi-Fi module version only)
Onboard multiple isolation protection circuitsMultiple protections, more safe and reliable
High quality 6-Ch relays, supports RS485 or Wi-Fi remote controlContact rating of the onboard relay up to 10A 250VAC/30VDC Directly controlling 220VAC home appliances, or devices below 30VDC
(* Only the Wi-Fi module version supports Wi-Fi remote control)
Onboard Pico HAT compatible interface and RS485 interface for easy expansionOnboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard 40PIN header compatible with some Raspberry Pi Pico HATs, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc.
Supports C/C++, MicroPython, Arduino IDEComprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
What's On Board
- RP2350B Dual-core and dual-architecture design, up to 150 MHz operating frequency
- 40PIN Raspberry Pi Pico HAT header
- Relay screw terminals for connecting with user devices
- 6-channel quality relayscontact rating per channel: ≤10A 250V AC or ≤10A 30V DC
- Optocoupler isolation chipprevents interference from external high-voltage circuit connected to the relay
- Power supply isolation moduleprovides stable isolated voltage, needs no extra power supply for the isolated terminal
- Digital isolation chipprevents interference from external signal
- TVS diode (Transient Voltage Suppressor)effectively suppresses surge voltage and transient spike voltage in the circuit
- Ceramic gas discharge tube
- RS485 matching resistor jumperOnboard reserved 120R matching resistor, enabled via jumper
- RS485 bus interface for connecting to external RS485 devices
- Power supply screw terminalSupports DC 7~36V wide voltage input
- LED indicators PWR: power indicator RXD: RS485 RX indicator TXD: RS485 TX indicator
- WS2812 RGB LED
- Type-C connector for programming, USB 1.1 with device and host support
- Passive buzzer
- RP2350 RESET button
- RP2350 BOOT button
- Raspberry Pi Radio Module 2Supports Wi-Fi 4 wireless networking and Bluetooth 5.2 (This module is only included in the Wi-Fi module version)
Pin Definition
Enclosure DesignABS Protection Enclosure With Rail-Mount Support, Easy To Install, Safe To Use
Outline dimensions
-
Brand WavesharePartNumber RP2350-Relay-6CH-WRaktárkészlet VANCikkszám RPI-WS32576Státusz ÚJ
-
RP2350-Relay-6CH
- RP2350-Relay-6CH x1
- Screwdriver x1
1
2
RP2350-Relay-6CH-W
- RP2350-Relay-6CH-W x1
- Screwdriver x1
1
2
Hírek
2026.01.07 10:00
2025.12.18
2022.09.18
2022.05.10
2020.04.06 8:00
2020.03.18
2020.02.27
Továbbiak »
Termékajánló
TOP termékek
Vedd a Neten
